How to take apart DELL Inspiron N 5110

This laptop is relatively easy to take apart. One thing I noted is that, in order to access the hard drive of this laptop, one has to take apart the whole thing. I have no clue why DELL designed it this way. Okay here you go!

1. Remove the battery. Press the power button to discharge anything left out.  Remove all the screws from the back. There are two hidden screws  on the back where there are rubber bushes. You have to take out those with screw driver to remove the screws. See in the pic where they are located. There is one on the other end as well. Also remove the memory cover and remove the memories as well.

Remove the CD drive as well. put a credit card in between the space where the cd drive joins the body and push with the card it comes off.

2. You made so far!  Let go to the keyboard. One of the easiest keyboard removal so far I found.
    There are 4 tab latches on the top edge of the keyboard that attaches it to the body of the laptop. With flat head screw driver gently press on those tabs one by one and the keyboard pops out.  ( Please see the red markings. 3 of them are marked. 1 is on the end of it ).  The bottom side of the keyboard got tabs which is inserted in the body. Gently wiggle a little bit and pull upwards to get the keyboard out. As always no excessive force!

 

3.  Lets removed the keyboard cable. Lift up the black latch on the cable using a flat bed screw driver gently. Alls the zif cables are on the laptop are like this. You have to lift up the black latch on it get the cable out.
 

4. Lets remove the top cover. Remove the three zif connectors and marked on the pic. Also remove the screws. Using a pry tool ( A credit card might work. Or a flat bed screw driver) gently pry on the top cover
to remove the top cover. You can insert your finger through the CD bay and give gently push as well. Now you have access to the main board.

5. Remove the screen.   Remove the screen cable on the left, by gently pulling toward the screen. Unscrew the screws where screen is secured.  Remove the wireless antenna  cables from the board. lift up the screen.
See the next picture to see things are marked.


6. Removing the board. Remove the speaker cable on the bottom. Remove the marked screws.  Gently life the board up. The board is connectd to the 2 sub boards with connectors. On the right top side where wireless card is. And on the left top where VGA connector is. you have to give gentle pressure up on the joining areas( ie where the main board meet those boards)

  Not that there are arrow marking on the board where screws are secured on the board.( Other wholes are for the screws coming from back or from the front cover).

  All set. You can now take the board from the bottom cover.

Thanks for reading.
We assume no responsibility for anything happens from following these instructions. Use at your own risk,